Nothing short of a modern technological marvel, development of the single LED 3201 Series is a revolution through Evolution. The complete build from the ground up of this model took 5 years in the making, what took it so long was timing, expertise and technological maturity coming together that otherwise would not be possible sooner.
Using complex computer simulations with Ai and Manual tweaks which took many iterations and processes to run within a powerful environment that speeds up development time. This development brought us to work closely with Ansys to develop the 3201 optic which was able to yield up to 400% improvement from initial results generated by a research Institute, the advancement of computer aided design and optical simulation enabled our team to maximise the optical output and minimize unwanted losses, with high accuracy and definition it to fulfill its fullest potential.
The 3201 optic is a fully internal reflection and is undergoing a patent for its unique optically optimized shape.
LI-3201 fulfills ICAO Low Intensity Type B and FAA L-810 requirements:
Effective luminous Intensity: 35 cd
Low Intensity ICAO Type B (>32cd)
>32 Candela (cd)
8° with 6° upward inclination
Advance optical grade epoxy with UV inhibitor, highly chemical and UV resistant
Customizable for AC or DC conditions
DC 48V >2KA
-20°C to +85°C
IP67 (fully weatherproof)
<10 uA (micro Ampere)
Resistant to shock and vibration
Auto ON/OFF of lamp, Photocell embedded within lamp
<150 Lux (±10%) = Lamp ‘ON’
>150 Lux (±10%) = Lamp ‘OFF’
For remote monitoring of:
A. Power supply failure;
B. Lamp failure
C. >10% of LED in lamp fail, causing drop in lamp output
1. NO (Normally Open)
2. Com (Common)
3. NC (Normally Closed)
56 x 70 x 83mm
UV & environment resistant resin
Stainless steel M5 bolt/nut/spring washer
Connect with us and let us help you. Find out more by contacting us via email or phone. We are ready to help!